1/10pcs TB6612 DRV8833 DC Motor Driver Board Module Dual Motor Driver 1A TB6612FNG Microcontroller Better Than L298N

DRV8833 BLACK

Description:
1. Size:18.5*16mm
2. Input voltage:3V-10V
3. Single H-Bridge output current:1.5A(It can drive two DC motor)
4. Overcurrent protection:YES
5. Short circuit protection:YES
6. Undervoltage lockout:YES
7. Overheating protection:YES
8. With a low-power sleep mode

Feature:
1. ULT PIN:mode set.Low level is sleep mode
2. OUT1,OUT2:1-channel H-bridge controlled by IN1/IN2
3. OUT3,OUT4:2-channel H-bridge controlled by IN3/IN4
4. EEP PIN:Output protection.Default no need to connect.
5. VCC:3-10V
6. GND

Application:
1. DC motor which drive current is less then 1.5A
2. 4-wire step motor

DRV8833 RED

Introduction of Features:

Size: 18* 21mm

Input voltage: 2.7V-10.8V

Single H bridge output current: 1.5A, can drive 2 DC reduction motor.

Built-in overcurrent protection, short circuit protection, undervoltage locking and overheat protection. With low power sleep mode.

Purpose: Can drive 1.5A DC motor and 4 wire stepper motor.

Features:

· Power supply voltage: VM=15V max, VCC=2.7-5.5V

· Output current: Iout=1.2A(average) / 3.2A (peak)

· Standby control to save power

· CW/CCW/short brake/stop motor control modes

· Built-in thermal shutdown circuit and low voltage detecting circuit

· All pins of the TB6612FNG broken out to 0.1″ spaced pins

· Filtering capacitors on both supply lines

Pin description:

ANI1: AO1 logic input control port, level 0-5V.

AIN2: AO2 logic input control port, level 0-5V.

BNI1: Logical input control port of BO1, level 0-5V.

BIN2: logical input control port of BO2, level 0-5V.

AO1 and AO2 are 1-way H-bridge output ports connected to two feet of a DC motor.

BO1 and BO2 are two H-bridge output ports connected to the two feet of another external direct motor.

GND: ground.

VM: Chip and motor supply pin, voltage range 2.7V — 10.8V.

STBY: grounded or suspended chip does not work, no output, 5V work; Level 0 to 5 v.

NC: empty feet